PELATIHAN PIPING DESIGN CONSTRUCTION AND MECHANICAL INTEGRITY

TRAINING KONSTRUKSI DESAIN PIPING DAN INTEGRITAS MEKANIKAL

PELATIHAN PIPING DESIGN CONSTRUCTION AND MECHANICAL INTEGRITYPELATIHAN PIPING DESIGN CONSTRUCTION AND MECHANICAL INTEGRITY

INFORMASI PELATIHAN PIPING DESIGN CONSTRUCTION AND MECHANICAL INTEGRITY

INFORMASI TRAINING KONSTRUKSI DESAIN PIPING DAN INTEGRITAS MEKANIKAL

This course is designed to provide the participants with a complete and up-to-date overview of the Process Piping Technology .It covers Code requirements from design through start-up of new piping systems, as well as standards for inspection and repair of piping systems that have been in service, as provided in API 570, Piping Inspection Code and API 579 Fitness for Service. General topics in the course include: Overview of ASME B 31.3 code, pressure design of piping components, selection of flanges, flexibility considerations, materials, impact testing, fabrication, examination and testing. The course further provides concepts and methods for assuring the mechanical integrity of existing piping systems. It presents a thorough understanding of how the methodology of API 570 as well as API 579 can be applied for assessing the present structural integrity of the piping component, and deciding its fitness for continued service as well as the projected remaining life. It also suggests remedial measures for mitigation of damage and thus extend the life of the Piping System.

TUJUAN INFORMASI PELATIHAN PIPING DESIGN CONSTRUCTION AND MECHANICAL INTEGRITY

1.To familiarize participants with the main concepts,of the B 31.3 code.
2.To provide participants step-by step approach in use of B 31.3 code for Design, fabrication, installation, inspection and testing.
3.How to Conduct and certify the pressure testing.
4.To learn the mode of deterioration of piping systems and pipelines
5.Be able to recognize causes of degradation in-service, and apply integrity analysis techniques to make run-repair-replace decisions.
6.To know about pipeline inspection and also how to evaluate and analyze the Inspection data
7.To know how to calculate corrosion rate, interval of inspection and similar parameters of piping inspection
8.To learn different methods of piping and pipeline repairs, alteration and rerating
9.The participant will be introduced to the latest techniques in piping and pipeline integrity

MATERI INFORMASI PELATIHAN PIPING DESIGN CONSTRUCTION AND MECHANICAL INTEGRITY

1.Piping Codes Overview, ASME B 31.3
2.Fluid service categories
3.Pressure Design of Pipes.
4.Pressure Design of Blanks
5.Case studies on Pipe Design
6.Branches and reinforcements
7.Pipe Material Requirements
8.Impact testing requirements
9.Preheating and PWHT
10.Fabrication and welding
11.Inspection, Examination and Testing
12.NDT of Piping System
13.Pressure testing of pipes
14.Piping Thermal Expansion
15.Flanges ASME B 16.5
16.In-service Degradation of pipes
17.API 570 methodology for Integrity assessment
18.Remaining life assessment
19.Repairs and alterations piping system
20.Pipe retirement thickness
21.Re-rating of Existing piping
22.Integrity assessment of buried piping
23.Evaluation of Inspection data
24.API 579 fitness-for-service assessment procedure
25.Concept of Remaining strength factor
26.Assessment of general metal loss
27.Assessment of crack-like flaws
28.Documentation and Records
29.Final Exam and feed back.

INSTRUKTUR INFORMASI PELATIHAN PIPING DESIGN CONSTRUCTION AND MECHANICAL INTEGRITY

Ir. Teguh Pudji Purwanto, MT dan Team

Metode Pelatihan Info Diklat :

  • Presentasi
  • Diskusi
  • Case Study
  • Simulation
  • Evaluation (Pre and Post Test)
  • Kunjungan/Praktek (Menyesuaikan/tentative)

Jadwal Info Diklat :

  • 2 sd 4 Januari 2018
  • 13 sd 15 Februari 2018
  • 27 sd 29 Maret 2018
  • 17 sd 19 April 2018
  • 7 sd 9 Mei 2018
  • 12 sd 14 Juni 2018
  • 17 sd 19 Juli 2018
  • 14 sd 16 Agustus 2018
  • 12 sd 14 September 2018
  • 16 sd 18 Oktober 2018
  • 21 sd 23 November 2018
  • 26 sd 28 Desember 2018

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Lokasi dan investasi Info Diklat :

  • Yogyakarta(6.500.000 IDR / participant)
  • Jakarta(6.500.000 IDR / participant)
  • Bandung (6.500.000 IDR / participant)
  • Bali (7.500.000 IDR / participant)
  • Surabaya (6.000.000 IDR / participant)
  • Malang (7.000.000 IDR / participant)
  • Batam (7.500.000 IDR / participant)
  • Lombok(7.500.000 IDR / participant)

Catatan : Hotel untuk pelatihan ada beberapa pilihan seperti Hotel Ibis, Hotel Aston, Hotel Amaris, Hotel Cavinton, Hotel Hyatt, Hotel Grand Aston, Novotel, Hotel Harris, Hotel 101, Hotel Grand Mercure,Ritz Carlton, Hotel Ibis Style dan masih banyak pilihan menarik lainnya.

Apabila perusahaan membutuhkan paket in house training anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan. Dapatkan harga spesial untuk pengiriman minimal 3 peserta dari perusahaan yang sama.

Fasilitas Training di Info Diklat :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
  • FREE TransporsiPeserta ke tempat pelatihan .
  • Module atau Handout
  • FREE Flashdisk
  • Sertifikat
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2x Coffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive
  • Training room full AC and Multimedia

Informasi Kontak Info Diklat :

Email : Informasi.diklatindonesia@gmail.com 

infodiklat.indonesia@gmail.com

 

Leave a Reply

Your email address will not be published. Required fields are marked *