Pelatihan Alignment Pump and Motor
Pelatihan Alignment Pump and Motor
Pelatihan Alignment Pump and Motor. Motor-Pump alignment is the process of aligning shaft centerlines between a motor and a pump. The motor is the prime mover, transferring power to the pump by the use of a coupling. This is probably the most common configuration of coupled machines in industry. In this type of alignment, the motor is almost always the moveable machine, and the pump is the stationary machine. In almost all cases, the pump is already piped up with suction and discharge flanges, which means it can move only slightly, if at all. motor-pump-alignmentProper shaft alignment is achieved by moving the motor. The motor is shimmed vertically to achieve the proper elevation to align it to the pump, both parallel (offset) and angular.
The motor is them moved horizontally to achieve proper horizontal placement for aligning the shaft centerlines, both parallel and angular. The motor is moved horizontally by the use of jacking bolts, or by the use of pry bars, hammers, or other tools. Motors are normally easier to move, since the motor is not piped into a process system. A short run of flexible conduit is most often used to run the electrical wiring from a local disconnect, or a rigid conduit, to the motor termination box. This allows for ease of movement of the motor.
ikuti juga : pelatihan centrifugal pump technology
Materi
- Fundamental Alignment
- Diagnosing Misalignment
- Measuring Misalignment
- Preparing Task Alignment
- Alignment Methods (praktis)
•Rough Methods
•Face and Rim - Alignment Tolerances
- Complicating Factor Alignment.
- Introduction to Laser Alignment
- Minimizes the forces of misalignment acting upon the bearings and seals of both components.
- Minimizes Wear of The Coupling.
- Reduce Energy Costs.
- Maximizes the life of the Machine Components by Minimizing Wear, ncreasing time between failures, and reducing vibration.
Peserta
Instrument Engineer/Supervisor, Plant Maintenance/Operators/Supervisors
| Lokasi & Investasi | Fasilitas |
|---|---|
| - Yogyakarta - Jakarta - Bandung - Bali - Surabaya - Malang - Batam - Lombok | - FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal) - FREE Transporsi Peserta ke tempat pelatihan . - Module atau Handout - FREE Flashdisk - Sertifikat - FREE Bag or bagpackers (Tas Training) - Training Kit (Dokumentasi photo, Blocknote, ATK, etc) - 2x Coffe Break & 1 Lunch - FREE Souvenir Exclusive - Training room full AC and Multimedia |
| Catatan |
|---|
| Hotel untuk pelatihan ada beberapa pilihan seperti Hotel Ibis, Hotel Aston, Hotel Amaris, Hotel Cavinton, Hotel Hyatt, Hotel Grand Aston, Novotel, Hotel Harris, Hotel 101, Hotel Grand Mercure,Ritz Carlton, Hotel Ibis Style dan masih banyak pilihan menarik lainnya.Apabila perusahaan membutuhkan paket in house training anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan. Dapatkan harga spesial untuk pengiriman minimal 3 peserta dari perusahaan yang sama. |
| Jadwal Pelatihan | Online Training |
|---|---|
| - 17-19 Januari 2023 - 14-16 Februari 2023 - 7-9 Maret 2023 - 11-13 April 2023 - 23-25 Mei 2023 - 26-28 Juni 2023 - 11-13 Juli 2023 - 14-16 Agustus 2023 - 25-27 September 2023 - 3-5 Oktober 2023 - 7-9 November 2023 - 28-30 November 2023 - 12-14 Desember 2023 - 27-29 Desember 2023 | - Instruktur mengajar secara LIVE Durasi 4 jam perhari selama 2 hari pelaksanaan - Media Live training Google Meet, Zoom atau Team link - Harga khusus Training yang sama diikuti oleh beberapa peserta dari perusahaan yang sama |
