Pelatihan Electric Power System Protection

informasi Penyedia Pelatihan dan Diklat, Penyedia Pelatihan, training dan bimtek, lembaga Pelatihan dan pendidikan sdm, Diklat Indonesia, info diklat 2021, lembaga penyedia pelatihan dan training

Pelatihan Electric Power System Protection

Pelatihan Electric Power System Protection

Pelatihan Electric Power System Protection .Construction of generation plants, transmission and distribution of electrical energy systems is a costly business. At both levels of national grid systems and local industrial plants, two important aspects are at the heart of this strategic industry. These are the reliability of energy delivery to meet customers’ demands and safe operation. At different stages of energy processing i.e. at the generation, transmission and energy delivery stage, protection of personnel and equipment is of prime importance. To achieve these goals, protection schemes are to be employed. The philosophy adopted in any protection scheme is to clear faults with a minimum system disruption, at a high speed, and in a simple and economical way. The course deals with different types of protection schemes used in large networks and those adopted in industrial plants. It describes some of the important components such as relays, comparators and other protective gears, and techniques and calculations used for their settings. The course also reflects on recent development and what are new in this important field of electricity industry.

ikuti juga :  pelatihan preventive maintenance of electrical equipment


  1. On organizational level
    •It introduces the subject of protection as an art where technical and economical constraints are to be met and compromised to achieve certain engineering requirements.
    •Learn to develop and manage well-protected plants that lead to a higher security, less outages and hence better profitability.
    •The course introduces new technologies used in relaying systems such as microprocessor and computer relaying which put organizations at the forefront of modern electricity industries.
    •Helps organizations in making appropriate decisions at times of system expansion or in situations where new developments become necessary.
    •Help organizations to understand causes of system failures, means available for remedies and hence better system management and operation with minimum investment.
  2. Personal Impact
    •Introduces and acquaints attendees with different components used in protection schemes.
    •Ability to perform some basic essential calculations required for relay settings.
    •Establishes confidence in dealing with protection schemes installed for protecting personnel equipment to grantee flow of energy.
    •Learn how to assess protection performance.
    •Add knowledge on how to improve security level by designing better protection systems with aim to improve performance.
    •Learn about error sources introduced by some protection scheme components and how to overcome them.

Course Content

  1. Fundamentals of Protection Practice and Basic Technology
    •Protective Gear.
    •Speed,Stability and Sensitivity
    •Circuit quantities and conventions
    •Fault calculations
  2. CTs Requirements
    •Error in CTs and compensation
    •Accuracy limit current of CTs
    •Class X CTs and linear CTs
    •Transients in CTs
    •Practical conditions
  3. Static Relays
    •Circuits using analogue techniques
    •Digital techniques
    •Output and Tripping circuits
    •Electrical Interference
    •Future trends
  4. Protection Schemes and substation design diagrams
    •Generator protection
    •Motor protection
    •Transformer protection
    •Line Protection
    •Substation Design Diagrams
  5. Differential protection
    •Classification of differential protection
    •Direction comparison
    •Circulating current and balanced voltage systems
    •Transformer differential protection
    •Differential protection for generators and rotating machines
    •Line differential protection
    •Busbar-differential protection
    •Differential system with multiple restraint
    •High impedance differential system
  6. Industrial Power System Protection
    •Busbar arrangement
    •HRC fuses
    •Industrial circuit-breakers
    •Infeed fault current from induction motor
    •Automatic changeover systems
    •Voltage and phase reversal protection
    •Private generation
  7. Installation, testing and maintenance of protection systems
    •Installation of protection equipment
    •Testing protection schemes.
    •Pre-commissioning tests,
    •Installation resistance measurements
    •Secondary injection tests
    •C.Ts tests
    •Periodic maintenance
    •Setting and testing numerical protection


  1. Manager, Supervisor, Group Leader, Section Head, Team Leader : Production, PPIC, Quality, Managers involved with energy management, Electrical engineers and Technical Staff who have to deal with the aspect of electrical and industrial power system protection, control and operation.
Metode Pelatihan :
  • Presentasi
  • Diskusi
  • Case Study
  • Simulation
  • Evaluation (Pre and Post Test)
  • Kunjungan/Praktek (Menyesuaikan/tentative)

Informasi Kontak Info Diklat :  

Email : | |

Lokasi & InvestasiFasilitas
- Yogyakarta
- Jakarta
- Bandung
- Bali
- Surabaya
- Malang
- Batam
- Lombok
- FREE Airport pickup service
(Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
- FREE Transporsi Peserta ke tempat pelatihan .
- Module atau Handout
- FREE Flashdisk
- Sertifikat
- FREE Bag or bagpackers (Tas Training)
- Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
- 2x Coffe Break & 1 Lunch
- FREE Souvenir Exclusive
- Training room full AC and Multimedia

Hotel untuk pelatihan ada beberapa pilihan seperti Hotel Ibis, Hotel Aston, Hotel Amaris, Hotel Cavinton, Hotel Hyatt, Hotel Grand Aston, Novotel, Hotel Harris, Hotel 101, Hotel Grand Mercure,Ritz Carlton, Hotel Ibis Style dan masih banyak pilihan menarik lainnya.Apabila perusahaan membutuhkan paket in house training anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan. Dapatkan harga spesial untuk pengiriman minimal 3 peserta dari perusahaan yang sama.

Jadwal PelatihanOnline Training
- 17-19 Januari 2023
- 14-16 Februari 2023
- 7-9 Maret 2023
- 11-13 April 2023
- 23-25 Mei 2023
- 26-28 Juni 2023
- 11-13 Juli 2023
- 14-16 Agustus 2023
- 25-27 September 2023
- 3-5 Oktober 2023
- 7-9 November 2023
- 28-30 November 2023
- 12-14 Desember 2023
- 27-29 Desember 2023
- Instruktur mengajar secara LIVE
Durasi 4 jam perhari selama 2 hari pelaksanaan
- Media Live training
Google Meet, Zoom atau Team link
- Harga khusus
Training yang sama diikuti oleh beberapa peserta
dari perusahaan yang sama


Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan.